P0326 SeaDoo Fault code

Updated: Jan 13, 2020

P0326 is the result of a fault detected by ECU on the knock sensor circuit. 9 times out of 10 this can be rectified by replacing the knock sensor which is mounted on the side of the engine under the air intake manifold. Its a circular sensor which effectively listens to the engine and do have a habit of failing in high performance applications such as a Seadoo Watercraft.

P0325 is the same fault and normally displayed on newer machines.

We carry stock all year round and supply mail order Genuine Bosch and aftermarket version of this sensor which can be found in our online SHOP . After installation the majority of Seadoo's do not need to go on a diagnostic system, the fault will be simply stored as a "occurred" fault on pre 2012 machines.

Also available from us is the MaptunerX which will allow you to read and clear your own codes at home, more details can be found in our online shop on this product.

If you prefer we can install the sensor in our workshop in Poole in Dorset or alternatively you can utilise our fully mobile technician service across Europe.

Fitting takes around a hour and can be undertaken by an competent home technician with basic tools which we can also supply.

Feel free to get in touch on our contact page.

Jetskihub "for all your jetski needs"

#p0326 #seadoo #kncoksensor

2,099 views0 comments

Recent Posts

See All


Years of workshop experience working with Seadoo craft has presented many different fuel supply issues. In this Blog we will explain the common causes of a loss of fuel pressure and ways to get around

SeaDoo iBR Module Repair

We repair in house the SeaDoo iBR modules 2014-2021 SEADOO SPARK RXT, RXP ,GTR ,GTX Please get in touch with your symptoms before shipping us your core, the module is opened, cleaned, lubricated, repa